Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5


Adjusting the Chain on a Huoniao HN125-8 / Lexmoto Vixen
06-05-2012, 02:33 PM (This post was last modified: 07-05-2012 01:21 PM by howtothings.)
Post: #1
Adjusting the Chain on a Huoniao HN125-8 / Lexmoto Vixen
Adjusting the Chain on a Huoniao HN125-8 / Lexmoto Vixen

This may also apply to a Honda CM / Honda CG and similar bikes. It's very important that the chain on a motorbike isn't too loose or too tight, you should have about 10-15mm freeplay at the centre of the chain.

1) Unscrew / loosen the chain tensioners at the rear of the bike (those two things sticking out of the back)
2) Undo the wheel nut on the right side of the bike (19mm) then pull the wheel back.
3) Line the wheel up, (important that it's straight), the chain tensioners work by pulling the wheel back, so tighten the chain tensioners equally then lock them off.
4) Tighten the 19mm nut.
5) Eyeball it, spin the wheel and make sure it looks straight. You can also use a ruler to measure the tensioning nuts length, they should be equal.


[Image: engrish25.png]
Reply



Forum Jump:


User(s) browsing this thread: 1 Guest(s)