[2in1] Two computers, one case! (Lots of images)

***Mark*** · 09-07-2010, 05:02 PM

Equipment

First off, the post for today:

More cuttings discs

[Image: 25.png]

WD WD5000AAKS caviar SE16 500GB hard drive (Going in the top PC)

[Image: 26.png]

Modding continued

Finished cutting the powersupply!

[Image: 27.png]

Cut the top a bit more, as the motherboard wouldn't go in.
Kind of scratched it and a few dents, i got carried away with a hammer and a flat ended screwdriver :dno

[Image: 28.png]

First mock fit up, it currently doesn't fit in :unhappy

[Image: 29.png]

I was hoping to keep 2 5.25" bays, one DVD slot for each machine but the RAM has different ideas.

[Image: 30.png]

After more modding today, i cut some more off the top and cut the second 5.25" bay as you can see the board now fits! Just.

[Image: 32.png]

As you can see, it really is a snug fit (the PSU is actually ontop of the board

[Image: 33.png]

Heres the space between the 5.25" bay and the PSU lead space and IDE line

[Image: 34.png]

I'm making motherboard trays for both motherboards. Recycling the old dell case.

[Image: 35.png]

Half cut it

[Image: 36.png]

I thought i might aswell try out my new paint on the screws i'll be using, this is a primer coat.

[Image: 37.png]

Login




Remember me Lost Password?